General For General 240sx/Silvia (s-chassis) discussions.

Car Stops At Like 3000 Rpm

Old Apr 8, 2007 | 11:14 AM
  #1  
homesliceisj's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 26
From: VA
Car Stops At Like 3000 Rpm

when the car is nuetral it revs up fine and works great... but when the motor is under a load the car jus like cuts out and bucks rediculously when it gets to around 3000 rpm or right when it starts to boost... it doesnt buck like a boost leak its liek somthin jus isnt right... WHATS GOIN ON??
Old Apr 8, 2007 | 10:22 PM
  #2  
Levi SPL S14's Avatar
Contributing Member
 
Joined: Oct 2004
Posts: 2,383
From: Here and there, mostly here.
you have a leak and or your timing is off
Old Apr 9, 2007 | 09:21 AM
  #3  
homesliceisj's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 26
From: VA
i have had boost leaks before and the jus make it buck a little this is like complete shut off almost i mean it will not go past 3000 what so ever... and yea the time is off but it doesnt seem like that would effect it this much... I jus recently replaced the MAF and went to the z32 could it have somthing to do with that????
Old Apr 9, 2007 | 12:47 PM
  #4  
silviaks2nr's Avatar
Contributing Member
iTrader: (1)
 
Joined: Feb 2004
Posts: 3,273
From: NC
you might need to replace the knock sensor or adjust base timing, in either case if the timing is too agressive and knock is detected the ecu will compensate by pulling a significant amount of timing under medium to high load. could also be signs of fuel deprivation
Old Apr 10, 2007 | 07:01 AM
  #5  
Durdan's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2007
Posts: 214
From: Tampa, FL
when you added the Z32 mafs, what are you using to compensate for it?
Old Apr 10, 2007 | 07:28 AM
  #6  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
make sure its wired like so. disregard the JWT disclaimer... ill post another diagram when i get home.

http://jimwolftechnology.com/wolfpdf...%20NISSANS.PDF

Last edited by Biggamehit; Apr 10, 2007 at 07:31 AM.
Old Apr 10, 2007 | 08:21 AM
  #7  
silviaks2nr's Avatar
Contributing Member
iTrader: (1)
 
Joined: Feb 2004
Posts: 3,273
From: NC
I just noticed you replaced the mafs with a z32 unit. You might have to buy an afc and play with the in and out settings so the ecu detects the propper voltage and gives fuel accordingly. without any kind of compensation it is likely that your car will run quite lean.
Old Apr 10, 2007 | 08:46 AM
  #8  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
hmm I overlooked the missing afc,,, you will def need something to help your ecu along. the only way that you can get away without running an afc for long is with some sort of ecu rom tune such as JWT ( Jim Wolf Technology) etc.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95s14zenki
NA Motor
2
Feb 13, 2008 09:12 PM
unit77
NA Motor
5
Feb 8, 2007 10:40 AM
redpotatoes
NA Motor
0
Oct 7, 2005 11:24 AM
twelvea
General
3
Apr 7, 2005 06:21 PM
Import Fanatix
General
8
Oct 1, 2002 04:48 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 06:01 AM.