i hav ea 95 s14

well my car overheated so i changed out the thermostat with a nismo, got a koyo rad w/ fal 210's and a nismo rad cap.

now it doesn't overheat but .. i was wondering

with the extra condensor/rad fan laying around... can i hook it up with the front of my condensor; being that there is no room in between the rad and the condensor; and the FALs covering my whole rad

would that do any more cooling to my engine ( and condensor because who wants warm a/c in burning hot summers) ... im running an all n/a setup

with new internals.

pistons/rods/cams/lift springs/retainers/knifed crank and such

i do a lot of stop of go traffic because of work and school and it does get a little above optimal running temp on the i95 and in manhattan here in ny. cause in the summer there is a lot of traffic and a car right in front of you doesn't do you any good so i was wondering.

i was into computers before and i used a heater core for cooling my cpu and such and i put a puller and pusher on each side and it helped so i was wondering

can i switch the 12v with the g and make it a pusher?

so all in all again will it do any good? i mean in the sense of pushing more air. and yea it will only turn on when the a/c is on.

thank you all again

 

anyone?~ ...