NA Motor Discussions regarding N/A KA24E, KA24DE, and SR20DE

Engine Clean up. Removing EGR and TB lines, BASICS

Old Apr 2, 2007 | 02:54 PM
  #1  
FuriousZ's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Mar 2007
Posts: 249
From: Amarill0 & Dallas, TX
Arrow Engine Clean up. Removing EGR and TB lines, BASICS

I just got a 93 coupe and so far i have been making sure that its reliable.

So far i have mostly cleaned the car, since i don't think they took good care of it. (or as much as i will)

I want to remove some engine components that i don't need.
I was thinking the EGR (exhaust gas recirculation valve),
AIV.
TB coolant lines,
what ever else i can remove.
(PLEASE TELL ME OF THINGS THAT I CAN REMOVE FROM MY NEW S13)

I have been searching but i can't get a clean writeup on the goods or bads of it.

Someone PLEASE help me.
Tell me if i should remove them, and if there is, point me to a write up on removing things that i don't need in my engine bay.

I will post pics of my car and the process once I get some clear responses.
ENRIQUe


i don't know if this pic is going to show thats what i want to remove! and what ever you all think i can remove!


Last edited by FuriousZ; Apr 2, 2007 at 02:56 PM.
Old Apr 2, 2007 | 03:35 PM
  #2  
LA_phantom_240's Avatar
Contributing Member
 
Joined: Apr 2005
Posts: 2,550
From: Slidell, LA
Clutch fan, stock coil with an MSD unit, battery reloaction. All of those will free up some much needed work room in our s13s. Good luck with your build.
Old Apr 2, 2007 | 04:10 PM
  #3  
MS!3's Avatar
Contributing Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 2,069
From: USA
Originally Posted by FuriousZ
thats what i want to remove! and what ever you all think i can remove!

yea take that shiet out, remove egr, clutch fan, a/c if your not a weenie baby, im sure theres some more things to remove that im not thinking of.
Old Apr 2, 2007 | 05:24 PM
  #4  
RuizXIII's Avatar
Contributing Member
iTrader: (2)
 
Joined: May 2005
Posts: 2,653
From: New Jersey!
!!!Eliminate the creature features they are for weenie babies hahaha!!!
Old Apr 2, 2007 | 05:33 PM
  #5  
jramosthe1st!'s Avatar
Contributing Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 2,324
From: kennewick wa.
if you don't mind the heat or the cold you can do away with the heater core, ac compressor and lines for these two.

they're not engine compartments but you can do w/o them

Last edited by jramosthe1st!; Apr 2, 2007 at 10:43 PM.
Old Apr 2, 2007 | 05:36 PM
  #6  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
pm sent.............
Old Apr 2, 2007 | 10:00 PM
  #7  
LA_phantom_240's Avatar
Contributing Member
 
Joined: Apr 2005
Posts: 2,550
From: Slidell, LA
I need the little bit of a/c my 240 has left.. louisiana heat + black car = zomg its hot.


But yeah, all emissions and related vaccuum lines, simplify the ignition system, make cooling better and youve already got a clean bay.
Old Apr 3, 2007 | 07:22 PM
  #8  
donteventry's Avatar
Registered User
 
Joined: Jan 2005
Posts: 394
From: Brunswick
take out the charcol canister!!! whooo hoooo ****kk emissions haha
Old Apr 3, 2007 | 07:25 PM
  #9  
MS!3's Avatar
Contributing Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 2,069
From: USA
Originally Posted by LA_phantom_240
I need the little bit of a/c my 240 has left.. louisiana heat + black car = zomg its hot.
But yeah, all emissions and related vaccuum lines, simplify the ignition system, make cooling better and youve already got a clean bay.
weenie baby! lolj/p

Last edited by MS!3; Apr 3, 2007 at 07:28 PM.
Old Apr 3, 2007 | 08:54 PM
  #10  
jramosthe1st!'s Avatar
Contributing Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 2,324
From: kennewick wa.
Originally Posted by donteventry
take out the charcol canister!!! whooo hoooo ****kk emissions haha
but then you'll need to do something about the vacuum lines. i don't think you can just block them off either.
Old Apr 3, 2007 | 09:42 PM
  #11  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
you can plug those no problem.. remove the lines and add caps to the hard vacuum lines...

most important vacuum's are main air idler and brake booster
Old Apr 3, 2007 | 09:46 PM
  #12  
onemoreblock's Avatar
Registered User
 
Joined: Apr 2006
Posts: 32
From: east coast nj
ah egr will keep your cyc temps down. and keep you from producing too much nox. which is a good thing unless you dont have emmison laws and in that case **** it remove your cat and replace it with a test pipe. full 3in exhaust and turbo the ka24de
Old Apr 3, 2007 | 10:22 PM
  #13  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
yea i have to worry about being blown up by children bombers in Iraq soon lol emissions is not the most of my worries.
Old Apr 4, 2007 | 05:54 AM
  #14  
RuizXIII's Avatar
Contributing Member
iTrader: (2)
 
Joined: May 2005
Posts: 2,653
From: New Jersey!
Lawlz Airman Jackson, you so silly hahahaha.
Old Apr 4, 2007 | 08:43 AM
  #15  
FuriousZ's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Mar 2007
Posts: 249
From: Amarill0 & Dallas, TX
pics

first some pics of my new car

.

Last edited by FuriousZ; Sep 13, 2008 at 08:15 PM.

Thread Tools
Search this Thread

All times are GMT -7. The time now is 02:42 PM.