Okey people i nearly have my 240sx stock car done. I am focusing on the engine now. The class is a stock class but i am going to nead to tear down the engine in the car. It only has 3 races on it but that was 2 years ago and now there is rust in the cylinders. So im looking at rebuilding it. What is the stock fuel pressure to the fuel rail on one of these? Going to be installing honda fuel pump in the fuel cell because the nissan one is to bulky. What kinda suggestions do you all have for reassembly and where can i find the parts at? Im thinking maybe a cam.

Doug

 

depends on which motor you have... and what you are allowed to do to build up the motor...if it is a stock class meaning no engine mods then i would hone the block put in new rings and bearings...as far as cams go like i said it depends on what you are allowed to do to the car to stay in the rules...

 

Well as for now the cam rules are pretty much open to whatever. It has to be an oem cam which means a regrind of a stock cam is still a oem cam technically. It just cant me a crane or a comp. cam.

Doug

 

here is a link and yes they are nissan parts...
http://www.courtesyparts.com/nms/s13/s13_1.html