What size is the engine mount mounting bolt so i know which size socket to grab first before i go under the car to replace my mount... my guess its a 13mm??? but someone correct me please.

 

?????????????????

 

it is a 14mm if I remember correctly

 

ok.. do i need to torque back down to factory specs when i put a new one on?

 

yes you need to torque everything to factory specs... you dont want your motor mount to fall off cus you did not have it tight enough...

 

guys i have a problem!!! my engine mount mouting bolt is stripped.. i went under the car.. with a long extesion and the 14mm.. and yeah its stripped.. its my broken mount.. what do i do now?

 

is it the bolt holding the mount to the frame? or one of the bolts holding the bolts holding the engine to the mount?
If its the bolt holding the mount.. just undo the bolts holding the engine to the mount... then once the engine is out, you can figure it out.. drill it, grind it, whatever you need to..

 

the bolt holding the mount to the frame..

 

time to drill it out i guess?? lol

 

i just spend a full hour drilling and isn't working. i give up.. i really do give up. i suck at life. : (

 

if the mount is already broke then once the motor is out of the way get in there with a an angle grinder and cut the mount just above frame in that silver area. bolt should fall right out after that. a hack saw could be substituted here but that would take just a little longer.