FS: Built CA18 Project Car (MUST SELL)
FS OR TRADE: Built CA18 Project Car (MUST SELL)
Hi Everyone, UPDATED
Up for sale is my CA18 Project Car. I have to sell because I am away at college and have no time or money to finish this. I also need money to pay bills. Here are the details, please e-mail me if you have any questions. (ballian@msu.edu
Year/Make/Model
1993 Nissan 240sx Fastback
Base Model-5spd
Color
Exterior-RED
Interior-Gray and Black
Mileage
11x,xxx on chassis
0 miles on rebuilt motor (thats right, 0 )
Vehicle condition
Exterior-Great condition, paint is still bright and shiny with the original clearcoat, only a few small dings that you would expect from a 12yr old car
Interior-Good condition, could use a detailing but no tears in the seats, also has black vinyl in the doors where the tweed used to be
CA18DET Engine-Outstanding. Could not ask for a cleaner, more sound, engine.
Body/Chassis-Great condition. No rust anywhere, also very straight with no suspension or brake problems.
Engine Mods
Engine Work
• JE Forged Pistons(stock bore)
• Polished, forged and shotpeened rods
• New bearings
• Balanced, polished and knife- edged crank
• Cryo-treated block
• Head ported and polished
• Upgraded Valve Springs
• Skyline 65mm Throttle Body
• Intake manifold ported
• 65 degree thermostat
• New oil pump
• New water pump
• Tomei 1.2mm metal head gasket
• New Headbolts
• CA18/SR20 Hybrid Transmission
• SPEC Stage 3 Clutch(6 puck)
• 300zx Oil Filter
• Butterflies removed from Intake Manifold
• Resurfaced flywheel
Fuel Delivery
• 300zx Fuel filter
Intake/Exhaust/Cooling
• Hybrid AUS FMIC and Piping (HUGE)
• Dual Electric Fans
As you can see, this car is perfect for someone with high power goals, or someone who just wants a reliable, well-built motor. You can put whatever turbo/manifold combo you want on there, this motor can take it up to a peak of 600hp, though 400-450whp can be done daily.
What this car needs
This car needs a turbo, manifold, downpipe and injectors.
Stereo
(Comes with the car but you can do whatever you want with it)
Panasonic Head Unit
Kicker 4x6s in doors
Kicker 6x9s in rear deck
Sony Amp
2 10" JBL Subs in a box
Location
This car is in Eastern PA but can be shipped anywhere in the US at the buyer's expense.
Asking Price
Asking $2800. Price is negotiable but please do it through e-mails. Keep in mind that well over $4k was put into parts and labor for this motor.
Contact
Please don't hesitate to e-mail me with any questions. If the car does not sell soon it will go up on e-bay.
ballian@msu.edu
Thanks!
MUST SELL WITHIN THE NEXT COUPLE WEEKS. WILL ALSO TRADE FOR S13 IN GOOD RUNNING CONDITION. Prefer a coupe but will take a clean hatch.
PLEASE LET ME KNOW!!
Up for sale is my CA18 Project Car. I have to sell because I am away at college and have no time or money to finish this. I also need money to pay bills. Here are the details, please e-mail me if you have any questions. (ballian@msu.edu
Year/Make/Model
1993 Nissan 240sx Fastback
Base Model-5spd
Color
Exterior-RED
Interior-Gray and Black
Mileage
11x,xxx on chassis
0 miles on rebuilt motor (thats right, 0 )
Vehicle condition
Exterior-Great condition, paint is still bright and shiny with the original clearcoat, only a few small dings that you would expect from a 12yr old car
Interior-Good condition, could use a detailing but no tears in the seats, also has black vinyl in the doors where the tweed used to be
CA18DET Engine-Outstanding. Could not ask for a cleaner, more sound, engine.
Body/Chassis-Great condition. No rust anywhere, also very straight with no suspension or brake problems.
Engine Mods
Engine Work
• JE Forged Pistons(stock bore)
• Polished, forged and shotpeened rods
• New bearings
• Balanced, polished and knife- edged crank
• Cryo-treated block
• Head ported and polished
• Upgraded Valve Springs
• Skyline 65mm Throttle Body
• Intake manifold ported
• 65 degree thermostat
• New oil pump
• New water pump
• Tomei 1.2mm metal head gasket
• New Headbolts
• CA18/SR20 Hybrid Transmission
• SPEC Stage 3 Clutch(6 puck)
• 300zx Oil Filter
• Butterflies removed from Intake Manifold
• Resurfaced flywheel
Fuel Delivery
• 300zx Fuel filter
Intake/Exhaust/Cooling
• Hybrid AUS FMIC and Piping (HUGE)
• Dual Electric Fans
As you can see, this car is perfect for someone with high power goals, or someone who just wants a reliable, well-built motor. You can put whatever turbo/manifold combo you want on there, this motor can take it up to a peak of 600hp, though 400-450whp can be done daily.
What this car needs
This car needs a turbo, manifold, downpipe and injectors.
Stereo
(Comes with the car but you can do whatever you want with it)
Panasonic Head Unit
Kicker 4x6s in doors
Kicker 6x9s in rear deck
Sony Amp
2 10" JBL Subs in a box
Location
This car is in Eastern PA but can be shipped anywhere in the US at the buyer's expense.
Asking Price
Asking $2800. Price is negotiable but please do it through e-mails. Keep in mind that well over $4k was put into parts and labor for this motor.
Contact
Please don't hesitate to e-mail me with any questions. If the car does not sell soon it will go up on e-bay.
ballian@msu.edu
Thanks!
MUST SELL WITHIN THE NEXT COUPLE WEEKS. WILL ALSO TRADE FOR S13 IN GOOD RUNNING CONDITION. Prefer a coupe but will take a clean hatch.
PLEASE LET ME KNOW!!
Last edited by CarObsessed; Apr 24, 2005 at 01:34 PM.
send pics to tougebattle@most-wanted.com
i need a car that is currently running and dont have time to finish this car. I am currently looking for an SR powered coupe, actually. I found one but it would have to be shipped from Cali.
Thanks for looking!
Thanks for looking!
Thread
Thread Starter
Forum
Replies
Last Post
bks14sr
For Sale - Cars For Sale
0
Oct 13, 2007 08:19 AM
98s14inaz
Private For Sale / Wanted
6
Oct 12, 2004 08:38 PM
dennis
Private For Sale / Wanted
0
Feb 2, 2003 06:21 PM




