Turbo Motor Discussions about aftermarket turbo'd 240sx and Silvias.

Getting ready to push up boost.

Thread Tools
 
Search this Thread
 
Old 01-15-2006, 10:25 PM
  #16  
Registered User
Thread Starter
 
Otterman's Avatar
 
Join Date: Oct 2005
Posts: 48
How far can I push (safely) my engine (via boost or anything else) with stock brakes and suspension? Is there a point where I wont be able to control my car very well with stock? I'd like to work on that stuff after I reach my satisfactory horsepower level... which will probably be after I get my fuel system done and new turbo put in. But I'd rather not hit the gas and have **** fall apart or hit the gas and have my brakes not work when I reach the end of my run lol.

EDIT: Sorry, I just didn't really want to make a whole new thread for this question cause it kinda deals with my original question about the fuel.

Last edited by Otterman; 01-15-2006 at 10:31 PM.
Otterman is offline  
Old 01-15-2006, 11:03 PM
  #17  
Contributing Member
 
motegineon's Avatar
 
Join Date: Feb 2005
Location: 神奈川県,日本
Posts: 2,586
Do suspension and stuff before u go ur motor work, no sense having all that power if u cant control it..
motegineon is offline  
Old 01-28-2006, 11:22 PM
  #18  
Registered User
Thread Starter
 
Otterman's Avatar
 
Join Date: Oct 2005
Posts: 48
If I plan on upgrading the turbo should I wait till I get the turbo to get my ECU tunned? Does the size/type of turbo have any factor on a ECU tuning?
Otterman is offline  
Old 01-29-2006, 01:28 AM
  #19  
Contributing Member
 
motegineon's Avatar
 
Join Date: Feb 2005
Location: 神奈川県,日本
Posts: 2,586
yea no sense in gettin ur ecu tuned before boosting it, just have everything lined up that way u can get it tunned prior to gettin the turbo kit on, dont want to be running around to rich or lean...and yes turbo size sort of has something to do with it because size it what influences lag, spool up time, max boost and so on...
motegineon is offline  
Old 02-02-2006, 05:50 PM
  #20  
Registered User
Thread Starter
 
Otterman's Avatar
 
Join Date: Oct 2005
Posts: 48
Does anyone have a Super Mega Flow HKS Intake that they have recirculated their BOV into? I've heard some people say I may have to knock a hole which I am hoping isn't the only option. I have a HSK SSQ BOV
Otterman is offline  
Old 02-23-2006, 10:01 PM
  #21  
Registered User
Thread Starter
 
Otterman's Avatar
 
Join Date: Oct 2005
Posts: 48
Ok, I've decided to upgrade my turbo instead of just pushing up the boost on the stock.


Heres what I have planned to buy so far:

z32 MAF
550 injectors
Walbro Fuel pump
ECU tunning
S15 T28 Turbo

From everything I've read this should be enough for the upgrade.

I've read different things saying the MAX you can get out of your car with a T28 is 300hp. Is that very most you can get or is that the most you can get if you only upgrade the turbo?

Also, I know someone here has a T28 in their s13. Is all there to do is take out the T25 and put in the T28? Everything hooks up stock with out any mods? I've read people say you dont need any mods and I've heard people say I need to get braided lines and such.
Otterman is offline  
Old 02-23-2006, 10:26 PM
  #22  
Contributing Member
 
motegineon's Avatar
 
Join Date: Feb 2005
Location: 神奈川県,日本
Posts: 2,586
im putting mine in this weekend so ill let u know, but yea u definately need new turbo oil/coolant lines. Also the bottom piece where the oil goes back into the block, the holes dont line up but i hear u can just take a circle file to it and its fine. Also the piple that comes out of the compressor size may have to be moded or replaced, ill let u know on that part, other than that though its all good.
motegineon is offline  
Old 02-23-2006, 10:26 PM
  #23  
Registered User
 
silviasichigo's Avatar
 
Join Date: Oct 2005
Location: ‰«“ꈺ–k’J
Posts: 339
You still won't get 350hp out of an S15 Turbo, but what you are shooting for is good.

I had the Following in my car before I fully built it and was at 320Whp

S15 T28
Greddy FMIC
Power FC
R33 MAF
Nismo Fuel pump
Nismo FPR
820cc injectors
264 cams with a 9.5mm lift
Tubular manifold Full stainless steel GP Sports exhaust
Split Fire Coil Packs
hand made aluminum suction pipe with Apex filter

There was a few more things but I Dyno tuned and street tuned and still only hit 320whp it was good enough the injectors were at 85% but the turbo was just about out of it range. I still ran down the 1/8 mile at 7sec~
silviasichigo is offline  
Old 02-23-2006, 10:29 PM
  #24  
Contributing Member
 
motegineon's Avatar
 
Join Date: Feb 2005
Location: 神奈川県,日本
Posts: 2,586
Originally posted by silviasichigo
You still won't get 350hp out of an S15 Turbo, but what you are shooting for is good.

I had the Following in my car before I fully built it and was at 320Whp

S15 T28
Greddy FMIC
Power FC
R33 MAF
Nismo Fuel pump
Nismo FPR
820cc injectors
264 cams with a 9.5mm lift
Tubular manifold Full stainless steel GP Sports exhaust
Split Fire Coil Packs
hand made aluminum suction pipe with Apex filter

There was a few more things but I Dyno tuned and street tuned and still only hit 320whp it was good enough the injectors were at 85% but the turbo was just about out of it range. I still ran down the 1/8 mile at 7sec~
How many lbs. of boost when you hit 320hp? Just wondering cuz im hoping for a solid 300hp after my turbo, maf, injectors, and safc.
motegineon is offline  
Old 02-23-2006, 10:35 PM
  #25  
Registered User
 
silviasichigo's Avatar
 
Join Date: Oct 2005
Location: ‰«“ꈺ–k’J
Posts: 339
1.4kg/cm2 hmmmmm lbs ??? you do the math hehe
silviasichigo is offline  
Old 02-23-2006, 10:39 PM
  #26  
Contributing Member
 
motegineon's Avatar
 
Join Date: Feb 2005
Location: 神奈川県,日本
Posts: 2,586
Originally posted by silviasichigo
1.4kg/cm2 hmmmmm lbs ??? you do the math hehe
Guestimation says about 20psi
motegineon is offline  
Old 02-23-2006, 10:44 PM
  #27  
Registered User
 
silviasichigo's Avatar
 
Join Date: Oct 2005
Location: ‰«“ꈺ–k’J
Posts: 339
Yeah it was pushing it but 1.4 was the max I ever boosted it. I just kept it there all the time the turbo lasted I sold it and the guy who bought it is still usning it to this day. I have seen 1.9 pushed through a Stock GTI-R turbo
silviasichigo is offline  
Old 02-23-2006, 10:51 PM
  #28  
Contributing Member
 
motegineon's Avatar
 
Join Date: Feb 2005
Location: 神奈川県,日本
Posts: 2,586
interesting, i was always under the impression ( this is for my s14 bb turbo) that it could only handle 18 psi...u think same apllies for it?
motegineon is offline  
Old 02-23-2006, 10:57 PM
  #29  
Registered User
 
silviasichigo's Avatar
 
Join Date: Oct 2005
Location: ‰«“ꈺ–k’J
Posts: 339
Nah I had the S14 to start out with Same mods listed I never could get it over 295whp that was at 1.2kg/cm2 this was a brand new turbo, There are slight differences in the S14-S15-GTI-R turbos they are minor but enough to make that kind of a difference. I could try and find the comparision that my buddy did give me some time.
silviasichigo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
240sx s13/15
SR
4
05-04-2007 03:52 PM
im4streetracing
Turbo Motor
1
02-02-2006 12:02 PM
meansman80
NA Motor
1
03-04-2005 05:55 PM
rayaapp2
NA Motor
0
01-08-2004 06:53 PM
Sileighty240
Turbo Motor
3
12-16-2003 06:36 PM



Quick Reply: Getting ready to push up boost.



All times are GMT -7. The time now is 01:32 PM.